9

The export settings you are using in Final Cut Pro X are preset Compressor settings and the export itself is actually using the Compressor engine (but with no user control). Compressor allows you control over those settings and to save your own custom presets. For instance, you may want to export an MPEG2 file with a particular bitrate, letterbox 16:9 ...


7

Because software stabilization methods cannot compensate for the shifting parallax of a shaking lens, they will always produce less than ideal results. In my experience, FCPX's stabilization is just as good as other software packages (I have experience with Shake and After Effects as well), and they all basically work the same way. This is probably not the ...


6

Here is a workaround I've discovered that seems to work ok. It's not elegant, but it gives you vector support within FCPX, which can be handy in a number of situations. It does require Apple Motion, however. Convert your vector file into a PDF using Preview. Create a Final Cut Generator in Apple Motion Import PDF Click the PDF in the "Media" pane (next to ...


6

ffmpeg will do it. You can either compile it from source, available here. Or more likely, download a precompiled binary for Macs from here. I don't use Macs so I can't vouch for the binary source. You will have to use the trim, crop and scale filters in a filterchain to accomplish what you want. The actual corresponding command for your pseudo command ...


5

Xudonax, The preset Final Cut Pro XML Round-Trip renders the graded files in ProRes 422, but it uses an old XML file, not supported in FCPX. You need to go to the Edit (important!) section of DaVinci after rendering the project. Then you will be need to make File – Export AAF, XML... command and check the fcpxml version 1.3 type of file. It will be ...


5

"I copy pasted Final Cut Events and Final Cut Projects folders to my external HD but I don't know how to restore it into project in FC. Any help is appreciated." It's better to perform this type of operation from within FCPX, instead of the Finder via copy/paste. With the project selected in the Project Library, choose File->Move Project... As long as you ...


5

Use the comma and period keys to nudge the clip left and right, respectively.


5

Cutting a video at a keyframe, without the slow and lossy process of decoding and re-encoding it, is only possible in the special case where you aren't applying any effects, overlays, rescaling, or anything. And where you're happy with bitrate and decoder requirements of the input. (e.g. h.264 High Profile, Level 4.0) Perhaps fancier editting software ...


4

This answer assumes that the video that you're editing is already in a 16:9 ratio, otherwise when you export there will be black bars on the sides or above and below your video. A 16:9 ratio is the standard for HDTV and Full HD. You're probably familiar with the Youtube video qualities - 360p, 480p, 720p, 1080p, etc. These are all 16:9. Therefore, all you ...


4

The technique you are looking for is called "motion tracking". Currently, FCPX doesn't have the ability to do this on its own, but you could use Apple Motion or Adobe After Effects to accomplish what you're after. Motion tracking, in general, follows patterns of pixels as they move around the scene. Depending on the effect you're after, and the demands of ...


4

Ok, so I solved it myself, and it wasn't pretty. To be able to work with my vector file in Davinci Resolve 12 (and in Final Cut Pro X without loosing any detail), I first had to convert it into a font. Yes, you read that correctly. I had to create a font where I assigned my logo to a specific character and then use the font in my editing program. More ...


4

This sounds like a perfect candidate for using multi-camera editing. You can automagically synch all the clips using their audio, and turn them into a multicam source, which lets you edit from the multiple synched cameras quickly and easily. How to do it in premiere: Select your clips in the Project panel. Then, right-click the selected clips and choose ...


3

I can recommend Adapter. It is a Wrapper for the ffmpeg package and does its job pretty well. Because of its easy UI. You could also use ffmpeg directly via macports, but I think that Adapter is far easier to control.


3

This is just a guess, but when the projects and events folders are on an external drive, they need to be at the drive's root level for FCPX to see them. So, when you had them on your external drive, the file path would need to be: External_Drive/Final Cut Events/YourEvent and External_Drive/Final Cut Projects/YourProject. They will not show up any other ...


3

What you are trying to do is impossible given how bad the original footage is. I'm honestly pretty amazed at the result in the third shot given the original state. Unfortunately, video frames are the equivalent of a series of JPEG images. It is possible to shoot RAW video on ultra high end cameras, but the data rates are completely off the charts (around ...


3

Multicam clips do exactly what you're asking. There's a good tutorial on how to use them here.


3

Apple Motion will let you create "motion templates" which are usable in FCPX. You can apply 3D transforms with Motion, and publish to Final Cut. This approach is easy to learn, but limited in scope.


3

Unfortunately, that isn't currently supported. Your text items will preserve the state from when they were first added. So you're stuck doing it manually. It's number 4 on the list of top requested features for the next update though and Apple seems to be aware of this site, or they've just been reading minds the last few updates- http://fcpx.tv/top.html ...


3

The original AppleTV could only playback at 1280x720 at 24fps. Because your video is at 25fps, it has to use a slightly lower resolution. If you either lower the frame rate (probably not an option) or exclude the original AppleTV, it should export at the higher resolution. I believe there's another setting than the "Most Compatible" one which excludes the ...


3

No. Or at least not yet. According to this post: https://discussions.apple.com/thread/2323932 EDIT: Here's the offical supported media formats for FCPX from the Apple support site. It shows that those formats are not supported.


3

Use Resolve, it is far superior to FCPX for grading. This is my workflow, since I always shoot in RAW with the Blackmagic Cinema Camera. I know there are ways to do this using XML, but I've run into issues with that when I segment a larger clip in FCPX and then bring it back to resolve it will then have each of those clips as individuals, instead of the ...


3

Keywords are an optional field of the project panel. In order to view or add keywords, you need to set the project panel to List View (you can switch between List View and Icon View with the buttons in the lower left corner). In the flyout menu of the project panel, select Metadata Display… to customize the columns of the list view to show whatever ...


3

I would say, yes it makes a difference. Rendering in FCPX happens in tiles. The size of the tiles is determined by a combination of the amount of memory they consume, the speed of the graphics card, and other similar factors. Increasing the video RAM will allow more and/or bigger tiles to fit on the card at one time. Bigger tiles means fewer passes to make ...


3

Sit behind a sheet of glass, write, flip video, key dissolve.


2

iDVD should have come with your mac. Give it a try. iDVD is a very basic DVD authoring tool (a category that is distinct from video editing, though authoring tools may be bundled with some editing packages). I've only used it a handful of times, but I'm fairly sure that it does everything that is requested here. One thing to keep in mind is that DVD ...


2

I don't know if you ever found a solution, but FCPX does have a Graduated Mask that works.


2

You can try to convert the defunct video to a different codec. Use something Lossless like ProRes, if you can, or Motion JPEG. Then put the clip back into your project. I had this problem once in FCP7 for about a week. It didn't go away until I re-recorded that video (which was painful, but in my case, doable). I wouldn't suggest such a radical solution in ...


2

By "actual size" I suppose you want to conform your footage pixel to pixel instead of frame to frame. For this you will need to change Spatial Conform to None in the inspector. The new default behavior in FCP is to scale your footage to either "fit" or "fill" the project's frame, the difference being only relevant when your footage doesn't have the same ...


2

You cannot expand the Transform Line in the Timeline. You can finetune your Position keyframes separately in the Viewer. Create keyframes and navigate between them with the keyframe buttons in the top-left corner of the Viewer. Position keyframes Click the Transform button in the lower-left corner of the Viewer (Shift-T). The yellow handles in the middle ...


2

The good news is I didn't just overlook something. Transcoding .WMV to .MOV is a real problem. The bad news is that it cost me $29 to solve it. I purchased the "Player Pro" license for Flip4Mac by Telestream after reading this support article by Apple.


Only top voted, non community-wiki answers of a minimum length are eligible