Questions tagged [multi-camera]
The multi-camera tag has no usage guidance.
35
questions
0
votes
0
answers
91
views
Synchronize 2 IP camera RTSP Streams
So we have 2 IP camera RTSP streams that we are saving to disk. At some point we stop the recording on both streams and go back to N frames in each video.
The problem that we are facing is that the ...
0
votes
1
answer
978
views
Multicam in Adobe Premiere when sources are split in several files
My cameras and my audio recorders don't give me a single file from a recording session, but instead, I get many sequential clips. I'm trying to create a multi-cam sequence in Adobe Premiere with the 3 ...
- 231
1
vote
1
answer
1k
views
Replacing source clips in a multicam sequence in Premiere
I've got a multi-camera sequence with approximately 1,000 painstakingly timed cuts between its 8 cameras. I just got new source material for those cameras (better renders of the same clips) and would ...
- 111
2
votes
1
answer
107
views
Is there a standard for multi-camera, high-speed video?
I develop an application to record from multiple high-speed (e.g. 200 fps) cameras simultaneously. Typically, the frame rate of these cameras is constant but this is not necessarily the case. ...
- 141
1
vote
0
answers
83
views
document cameras vs webcams
Is there any practical difference between a webcam on suitable mounting and a document camera or visualiser?
This is a well worn topic but laced with less helpful information from manufacturers who ...
- 111
1
vote
0
answers
53
views
Techniques for merging two separate and moving camera shots
'The Man From U.N.C.L.E.' (2015) contains a neat break-in scene that shows a special force team arriving and infiltrating an industry area. A few seconds of this scene really got me and I wonder how ...
- 11
0
votes
2
answers
102
views
Mixing multiple streams into one, posible?
How you can I implement a virtual mixer from different streams. When a streamer downloads an obs, it broadcasts the stream directly to the streaming site. Is it possible to make the stream go to ...
- 103
0
votes
1
answer
36
views
How can I record from do multi iPhone cameras
I’ve been asked to provide a cost effective solution for recording a church service. I need to use three cameras in three different locations. There is a Mac onsite that I will be recording to. I need ...
- 1
1
vote
1
answer
81
views
Getting hdmi signal of a camera to TCP/IP network and read on computer
I would like to know if such application can be made with this type of devices and what would I require to actually read the signal on my computer?
here is a small figure I made
i plan on putting ...
1
vote
0
answers
46
views
Premiere Elements: alternating between parallel video tracks
say I would be filming same thing with multiple (3-4) cameras.
What's the easiest way to be able to make a final video alternating between them at arbitrary points?
I know I can split the clips and ...
- 11
1
vote
1
answer
474
views
How is a multi-angle scene filmed?
There is a great scene in a popular TV series.
In this scene, a clerk (in a white-and-blue dress) is shown from 3 angles.
Each angle is around 7 seconds long.
I wonder how they filmed it.
Did they ...
- 167
1
vote
1
answer
961
views
Working on multi-camera edits using proxy files in Premiere
I want to be able to make multi-camera edits using low res proxy files, then be able to recreate those edits using HD footage. I'm using CC 2019. Here's my workflow:
Import HD files into Premiere, ...
- 8,162
0
votes
3
answers
628
views
Decrease FPS of too-high FPS video or increase FPS of too-low FPS video?
I created two videos of the same scene with two different cameras. The issue however is that camera 1 captured everything in 23.85 fps and camera 2 everything in 24 fps.
Since I need to synchronise ...
- 101
2
votes
1
answer
415
views
How do I add a synchronized clip/angle to a multi-cam clip?
I selected a 10 clips of the same event and created a new Multicam clip. The videos aligned perfectly via Use audio for synchronization. I edited the entire clip and chose different angles at the ...
- 413
2
votes
1
answer
33
views
Match color between 10 cameras
I will need to film on 10 cameras soon, as I can't afford to rent 10 cameras, I will collect them from friends, which means I will have many diffrent cameras.
Should I try to color match them in ...
- 58
1
vote
2
answers
3k
views
How to show multiple camera angles together in a Multicam clip in FCPX?
So I've been able to combine two different clips shot by two different cameras at different angles at the same time by creating Multicam clip and choose to sync by sound.
However, when I try to edit ...
- 111
1
vote
2
answers
1k
views
How to rotate a (vertical) clip for multicam in Final Cut Pro X
I have two clips taken at the same time: one taken from a camera, one taken from an iPhone. I am going to switch between the clips to change angles, so I need to create a "New Multicam Clip" in Final ...
- 111
3
votes
1
answer
820
views
Premiere: Renaming cameras in a multi-camera sequence
Is it possible to rename cameras in a multi-camera sequence?
Why I need this:
I have a multicam sequence that shows footage that has to be synced with audio for certain people. However it is hard to ...
- 211
4
votes
1
answer
683
views
How to enable multi-camera in Premiere *after* I've already made tons of cuts
I started with an hour-long video interview and cut it down into a 4-minute sequence of clips using Adobe Premiere Pro CC 2017.
Then I remembered that I had a 2nd camera's video file.
How can I ...
- 245
0
votes
1
answer
74
views
Is there some sort of macro facility for inserting repeated actions?
I'm new to Final Cut Pro X. I do a lot of shooting with two cameras and sometimes I want to do split screen, and other times I want to show one view or the other. I transition from one view to another ...
- 101
1
vote
0
answers
104
views
Premiere multicamera audio not working
I've got a project with two video tracks from two cameras, and an audio track from a separate recording (from neither camera). Everything is synced up, but when I convert this to multi-camera, ...
- 246
1
vote
2
answers
2k
views
Cross dissolve error in Permiere Pro
I have a multicam project of 4 cameras. I did the multi-camera record which resulted in a single track sequence with the switching between the cameras. Then I applied the default transition to all ...
- 133
1
vote
4
answers
140
views
Audio/video sync puzzle
I filmed an event with two cameras and I need to sync the second camera footage with the audio of the first. This was a live event and I couldn't record sync aids like a clapper.
I name my video files ...
- 246
0
votes
1
answer
101
views
FCPX 10.3 Audio multicam angles names to appear in main timeline?
Is there a way to have the names I give audio multicam angles, appear in the main timeline?
When I expand audio components it just has the name of the whole multicam clip.
- 703
4
votes
2
answers
1k
views
What are Grey Balls used for?
I know that a Grey Card is used for the white balance of the camera, but whate are the Grey Balls used for?
On big Productions, there is usually a guy (what is his job?) that holds up a grey ball and ...
- 342
3
votes
2
answers
3k
views
Separating and Mapping Audio Channels in Premiere CC Multi-Camera Sequence
I'm having a lot of trouble getting my audio to work properly in multi-camera sequences.
I have just two sources, both video with a single synced stereo track. The stereo tracks for each source have ...
- 31
3
votes
0
answers
60
views
Using a Submix track for Multicam in Premiere
In Premiere CC 2014, I am using a Multicam Sequence that uses the topmost audio track when changing cameras.
I have a few audio tracks that I want mix, so I mapped them all to a submix track
Is it ...
- 131
3
votes
1
answer
438
views
4K Workflow in FCPX - crop down for multicam angles
Shot an 80min interview @ 4K 422LT (271GB)on BMPC and want to create 3x 720p angles for multicam. Unsure if it's best to create them as compound clips cropped from the one 4K master clip inside of ...
- 703
0
votes
2
answers
2k
views
60fps and 30fps clips exported into one file?
I have two cameras: one films in 30fps and the other in 60fps. These settings cannot be changed (why the manufacturer did that I don't know).
When I export the finished product, which is the better ...
- 129
1
vote
0
answers
26
views
Good tools for spatial specification of a moving shot?
I'm still not very familiar with the tools available out there, so I'm hoping the community can provide some pointers:
At 10:03 in this video, they show a simple animation of how camera and talent ...
- 117
5
votes
2
answers
2k
views
Organizing a Multicam Clip in Premiere
In Adobe Premiere Pro 2015, you cannot sub-clip a multi-camera source clip, which is a shame, because sub-clipping is the most useful way I've found in Premiere for organizing segments of an extended ...
- 687
2
votes
1
answer
1k
views
How to do picture in picture with Premier Pro Multicamera
I LOVE the multicamera magic in Premier Pro CC but I can't quite figure out how to do a picture in picture shot like at the start of this video:
The multi camera ...
- 143
1
vote
1
answer
63
views
Synchronise in Premier Pro
Background: I've created a multi-cam sequence with three cameras in Adobe Premier Pro CC, which was working fine. I then came to add an additional camera, using CMD + Double Clicking on the Multicam ...
- 111
1
vote
2
answers
57
views
Video encoders that display frame with most movement
Are there any video encoders that can monitor multiple video frames and display whichever frame is the most active? I would use this during a live streaming event and it would be great to automate ...
- 21
3
votes
1
answer
6k
views
Multi-Cam View Disappeared from Premiere CC
I'm relatively new to Premiere CC, and very new to multi-cam editing. Half an hour ago the "multi-camera" view disappeared. That's the view that shows my 2 camera angles, side by side, and one of them ...
- 1,589