Questions tagged [blackmagic]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
1
vote
1answer
17 views

What does a flashing button mean on the Blackmagic ATEM 4 M/E front panel?

What I know The front panel of the Blackmagic Design ATEM 4 M/E is used for routing the AUXes of the mixer similarly to a Smart Videohub. Problem I realized that sometimes the buttons of some AUXes ...
2
votes
1answer
21 views

What causes a loud tone/noise in Blackmagic ATEM talkback?

Setup I have a Blackmagic ATEM 4 M/E and one of their studio cameras. I have a headphone on the camera and an active speaker on the ATEM so I can hear talkback. Problem There is a super loud whine/...
1
vote
3answers
49 views

Prime or Zoom for Video (Micro Four Thirds)

I am looking to get a Blackmagic Pocket 4K. I know that you can do the EF conversion, and use Canon EF lenses, but I want to keep the cost down on my initial purchase. I am looking at either getting ...
0
votes
0answers
53 views

can't get gstreamer decklinkvideosink to work

These two commands work: gst-launch-1.0 videotestsrc ! decklinkvideosink device-number=0 mode=1 and gst-launch-1.0 -v filesrc location=/tmp/a.mp4 ! decodebin ! glimagesink however, the following ...
0
votes
0answers
23 views

What are the best lenses for Blackmagic 6k video recording?

I'm planning to buy a Blackmagic 6k pocket cinema camera and record probably 4k videos and some 6k. I'm planning to record Salsa and Bachata dances in low light environments as well as daylight ...
0
votes
0answers
8 views

SSD in Blackmagic Hyperdeck Studio fails to work after power down

I'm using a Crucial SSD with my Blackmagic Hyperdeck Studio. I've used the hyperdeck to format the drive, per instructions, and the deck performs fine. I can remove the SSD, power down the Hyperdeck, ...
0
votes
0answers
31 views

Is there a camera that records video with a quality and style similar to the Black Magic Pocket 4k?

I was looking for a camera to record videos. My aim is to record videos to make films and music videos. I know there are many factors that are independent of the camera to make videos with a '...
2
votes
1answer
322 views

DeckLink recording using ffmpeg on Ubuntu 18.04 doesn't start

I've been spending the 24 hours troubleshooting this problem, but am getting a bit stuck. Pre-info: I'm running an Ubuntu 18.04 server with a DeckLink Duo 2 card inside. Goal: Capture video from the ...
0
votes
0answers
421 views

Capture original timecode with ffmpeg from decklink

I am trying to capture tape content via a BlackMagic Decklink Quad 2, using ffmpeg. I believe the timecode is passed on through the Decklink because when capturing manually with MediaExpres the ...
2
votes
1answer
496 views

Blackmagic RAW get Thumbnail in Windows Explorer

Is there any known Plug In or similair which can show BRAW Thumbnails in Windows Explorer? Or does anyone know how one could write such an Plug In?
2
votes
1answer
5k views

Changing duration of multiple still frames at once (stopmotion animation)

I want to make video from multiple still photos (some kind of slideshow). When I drag&drop photos from media pool, they appear on timeline, but last too long. When I select all frames, press right ...
1
vote
1answer
88 views

Fujifilm X-T3 or BMPCC4k for musicvideos and feature film

I'm currently looking which camera that I should buy. I narrowed it down to the BMPCC4k or the Fujifilm X-T3, but not sure which one I should pick... I mainly make music and event videos, but next ...
1
vote
1answer
112 views

BlackMagic hyperdeck Connection failed [closed]

I've got a Blackmagic hyperdeck and a computer. Their are both connected on the same network. The network settings of the hyperck are : Remote : ON DHCP:OFF IP address:192.168.1.100 I can ping the ...
1
vote
0answers
19 views

Track and apply fixed positioning in frame for subject

I used tripod to film a subject which is speaking and their head is moving around ever so slightly. I want to to position the subject based on their eyes so that their eyes do not move at all. I am ...
0
votes
1answer
470 views

FFMPEG - MAC OS Cannot Capture from Black Magic UltraStudio (Thunderbolt)

I have Black magic UltraStudio Express that captures SDI or HDMI and Connected to MacBook via Thunderbolt when I list devices I get the Audio but not the video : $ ffmpeg -f avfoundation -...
2
votes
1answer
1k views

replace black frames with previous frames

I have problematic footage from diving due to my camera/SD card - every 4th or so frame is just black, and I want to replace all those black frames with either an interpolation between the previous ...
0
votes
1answer
41 views

Blackmagic UltraStudio 4k Extreme recording through SFP

The Blackmagic UltraStudio 4k Extreme has some SFP ports. Is it possible for that device to record to a network location like a NAS or SAN directly using a fibre connection? Or is the fibre ...
1
vote
1answer
426 views

How can I create proxy videos from Ursa Mini CinemaDNG sequences?

I am currently working on a web series where we are shooting in RAW image sequences with a Black Magic Design Ursa Mini 4k. We have a mixed post production environment where the editor is working in ...
0
votes
3answers
138 views

Calculate depth-of-field on BMPC 4K using a 50mm/1.8

I stand up the back of a room on a riser and capture a speaker at podium + their presentation on the screen using a blackmagic production 4K. I estimate I am 8 metres from the subject. Currently I'm ...
1
vote
1answer
499 views

How do you load gopro footage into Blackmagic Fusion?

I'm trying to get started with Fusion. I have h.264 encoded video in a mp4 container. When creating a loader I get an unhelpful error of 'Loader1 failed at time 0'. Googling around I found some ...
1
vote
0answers
123 views

Resolve (Correct/Grade) > XML > FCPX

Can an XML exported from Resolve contain corrections/grading decisions (made in Resolve) that FCPX can apply to the a single large ProRes file, or does a new ProRes large file need to rendered from ...
1
vote
1answer
2k views

ffmpeg and decklink- how to specify audio_input for hdmi video?

I'm using an Intensity Pro 4K to capture with ffmpeg via the decklink commands. According to the documentation: video_input Sets the video input source. Must be ‘unset’, ‘sdi’, ‘hdmi’, ‘...
0
votes
0answers
99 views

Blackmagic (BMPC 4K) colour moire removal

Does anyone know a way to: Prevent colour moire at time of capture Remove colour moire in post (FCPX or Resolve) BMPC 4K / ProRes422HQ / ISO 400 / 6500K / Film / 30fps
2
votes
2answers
3k views

Blackmagic setup: How do I record all cameras in a multicam broadcast?

I've been tasked with acquiring equipment to broadcast a festival through online stream, and have decided that blackmagic may be a good direction to go, so I'm going to strictly reference their ...
1
vote
1answer
3k views

How do I playout rtmp stream to SDI (Decklink Studio 4K) using FFMPEG command?we are using Windows 7 operating system

ffmpeg -re -i rtmp://server/live/streamname \ -c:v rawvideo -pix_fmt uyvy422 -vf scale=720x576 \ -c:a pcm_s16le -ar 48000 -ac 2 \ -f nut - | /bmd/bmdplay -C 0 -m 2 -f pipe:0 Kindly share the exact ...
1
vote
2answers
5k views

Why does HDMI out on my Canon 5D Mark III work with my TV but not my Lilliput monitor or BlackMagic Design Shuttle 2?

Facts as I observe them: I can use a mini-HDMI to HDMI cord to mirror my Canon 5D Mark III on my consumer Samsung television I can use a consumer HDMI device such as an Apple TV to power my Lilliput ...
1
vote
1answer
511 views

What hardware do I need? Multiple audio input devices + BMCC video to Media Express

I'm a non-professional user with a Black Magic Cinema Camera 2.5k (BMCC). I have a number of separate audio outputs that I want to record with the video in Black Magic Media Express so I use multiple ...
1
vote
0answers
48 views

Final Cut Pro X stopped outputting to an Intensity Pro

Final Cut Pro X stopped outputting to my Intensity Pro card. Resolve sends video to it fine, so I assume it's in working order. I have the latest OSX, latest Final Cut Pro X, and the latest "...