I am trying to record all my old VHS tapes. I bought a video grabber, usbtv 4-1.2:1.0: Fushicai USBTV007 Audio-Video Grabber, but somehow that does not work well. I tried using VLC, but that has some strange effects. Often it shows past frames while running. Maybe some buffering is needed? I also tried ffmpeg, but that gives me a lot of errors, and also those past frames in between. Maybe the driver is not that good? I also tried in Windows using the software that came with it, called honestech vhs to dvd. That appears to not show the flickering/past frames issue, but it barely has any configuration options, so I would rather not use it.

Does anybody have any experience with this?


  • 1
    Could you maybe upload a sample video somewhere which shows the problem ? What OS / OS version are you using (Windows, Linux..) ? If you're using Windows, you can try VirtualDub, which I've used successfully for video capture. Dec 26, 2016 at 9:56
  • To @JonasCz questions, I'd add: What controls are missing from the honestech software that you'd like to use? Dec 26, 2016 at 17:26
  • USB devices are not really fast enough for video work, even something as low bandwidth as VHS. see @MartinAndrews answer below.
    – pojo-guy
    Sep 24, 2017 at 12:32

2 Answers 2


I did this a few years ago, digitized dozens of my family's old home videos.

The way I did it was, as at the time I was doing it from home and didn't have a IO device such as a DeckLink, I simply used a MiniDV Portable Recorder I got off eBay; which allows composite, component, and S-Video In.

Once the VHS tapes were transferred to my "Digital Intermediate" so to speak, I simply did a standard FireWire Capture using Premiere.

This also provided me with a set of DV Master Tapes as a backup.

You can likely get a used MiniDV HDV Record Deck off eBay for a few hundred dollars now that tape is dead; and just flip it when done (basically no cost if you can sell it for what you pay for it).

Going straight from Analog Tape, really requires a real IO device such as a DeckLink card to get good results, and a DeckLink card with analog IO will be much more expensive.

  • Going to DV means copping quite a big loss of quality due to the fairly heavy compression in that codec. How important this is depends on the user, but it's worth noting.
    – stib
    Dec 28, 2016 at 10:09
  • I recommended going to HDV. While still compressed, from VHS which at best will produce in the neighborhood of 210-230 lines of resolution, using HDV, which has a horizontal resolution of 1080; should not, to any eye, be noticeable. On a scope, at high magnification, I'm sure there would be a bit of loss in under limit and over limit (0 and 100) luma and chroma, but for what he is describing, not even the best trained eye on a reference monitor would likely see the difference between the HDV and an uncompressed capture of a 20 year old VHS tape. Jan 10, 2017 at 5:47

I may have found the answer ... I tried a different tape, and all seemed to work well. Stupid me did not check if the error is already on the tape :D


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.