2
votes
1answer
271 views

How to use cloning effect if the clips are overlapping themselves?

I have tried to combine two video clips, but it feels impossible. In the first clip there's one character running around the screen. In the second clip the character is just standing (still being ...
2
votes
0answers
88 views

How do I edit source material from DVDs in Final Cut Pro?

I'm currently undergoing a project where I have to edit some material only available from DVDs. Basically I need to export a clip or two from the DVDs, and edit them in FCP for use on the net. The ...
2
votes
1answer
112 views

Automate turning on and off Twixtor effect in After Effects

While using Twixtor in After Effects, you can automate the speed of the clip by manipulating the "Speed %" under "Output Control". Now, since there's no good way to do time-remapping natively in After ...
5
votes
5answers
15k views

Easiest way to stitch GoPro videos that have been split due to length?

I am recording 15-minutes videos with my GoPro Hero 3 Black edition. The camera starts a new file every 10 minutes of recording by default. I do not think I can change this in a setting. When I do ...
2
votes
2answers
2k views

How do I set up an RTMP stream server and URL endpoint?

I've got a Haivision Barracuda, which can stream RTMP to a URL (secured by username/password) set in its interface, but have very little experience of streaming video. What software do I need (Windows ...
1
vote
1answer
256 views

Component YPbPr to VGA with monitor that supports Sync-on-Green

I want to connect a YPbPr component video signal to a computer monitor using a simple component-to-VGA adapter, I know this isn't possible on most monitors as you would need a converter to convert ...
0
votes
1answer
1k views

Which software gets the fastest rendering times? [closed]

I'm sure there are benchmarks out there, but I'm not sure where to find them. Circa 2006 I was holding on to Vegas 6 without letting go because I could see very noticeable differences in its rendering ...
0
votes
1answer
126 views

Best video performance with the Nikon 5100?

I have decided to run a "vlog" as of recently, so I decided to test out my Nikon D5100's capabilities. It is consistently refocusing, thus creating a very loud, irritating noise. When I set it to ...
0
votes
2answers
5k views

Is it possible to convert output of TV Channel (set top box 720p) to 1080p?

I have Toshiba 29PB200ZE (just purchased). Now the problem is it displays pixels with very blur effect. Reason is that the Cable operators in India (using Standard Channel Broadcasting) broadcasting ...
1
vote
1answer
157 views

Automated aligning audio tracks with timings for dubbing screen casts

We have some screen casts that need to be dubbed to various languages for which we have script for the target language like: Begining Time | Audio Narration 0:0 | blah nao lorep iposm... ...
3
votes
2answers
2k views

create subtitles track by automatic timing of existing text

1 00:00:01,000 --> 00:00:04,000 I am using Adobe Premiere to produce videos in English by gluing together multiple clips put together from lots of different footage or sources. I do have a text ...
4
votes
3answers
215 views

Recommended Encoding for VHS to Digital to be Followed by Post Processing

I have VHS tapes that I want to digitize. I started this using something like Pinnacle's Dazzle. I notice that the only encoding options were for compressed video, which could lead to quality ...
2
votes
1answer
1k views

Blur whole text and then “unblur” part of it

I have a text in after effects that I wish to first blur the whole thing and then animate it so that a part of the text is clear. If I have the text Maecenas sed diam eget risus varius blandit sit ...
1
vote
0answers
397 views

Is it there a way to create a video playout system? (Preferably in Linux)

I am facing a situation caused by the need to start broadcasting in High Definition and there are a few Digital Automation/Playout Suppliers that offer excellent solutions such as Fission, Miranda, ...
1
vote
2answers
445 views

Recording video and audio with external input to computer with Canon 600D

I like to do drum covers, but the process always takes ages. I have to record my sounds from my electronic drumset (TD-9KX) to Cubase via a Tascam US122-MKii interface. Video is captured with a Canon ...
0
votes
1answer
97 views

Looking for compressed standard definition file format to share footage between Final Cut Pro 7 and Adobe Premiere Pro CS6

Brief Background I have a 30 minute film originally edited on Premiere Pro 1.5 in 2005/2006 that used 4:3 720x576 PAL interlaced DV AVI footage imported by firewire from a DV Cam. The entire raw ...
0
votes
2answers
104 views

recording to multiple locations

I am not 100% sure if this is on topic or not here but I think its the most relevant place to post this. Are there any programs out there that record the screen but saves the output to multiple drive ...
2
votes
1answer
318 views

Why does After Effects not enable me to work with 60FPS?

For a short student film, I'd like to be able to work with shots that are 60FPS. For some reason I dont see this option:
1
vote
2answers
2k views

How to add gradient transparency mask in final cut pro x?

I want to add a gradient transparency mask so that the front layer will slowly transform into the layer below. Can anybody suggest something? I'm not talking about transition in time, but transition ...
2
votes
1answer
4k views

RG6 vs RG59 HD-SDI cables for live stream

It seems there are lots of discussions on the web, none recently though, on RG6 vs RG59 and the distances that they can carry signal. For situations when quality matters, such as live streaming (as ...
2
votes
1answer
53 views

Software to make a transcript?

I record conferences and produce them in an HTML player. I have a need to transcribe some content and integrate it into the player. I found this question, but the answer seems to say that the ...
3
votes
1answer
55 views

Bluray I/O speed

I don't know if this is the correct place to ask this type of question, but here is it. I wanted to find a ball park size of each blu-ray frame size in bytes. This is my calculation which cannot be ...
1
vote
2answers
75 views

Free songs for video production [duplicate]

I would like to make a video with songs in the background. I'm mostly interested about classic music, but other genres as well. I know of Creative Commons. However, I was wondering if there are ...
2
votes
1answer
82 views

What is the best way to record from a single fixed camera?

I run a video system at my church that consists of two fixed robotic cameras among other things. The person who installed this equipment didn't have experience with video production, only display, so ...
0
votes
1answer
695 views

CamTwist + Blackmagic Intensity Thunderbolt Shuttle Settings

I'm trying to set up CamTwist + a Blackmagic Intensity Thunderbolt Shuttle on a MacBook Pro but am getting a black screen in CamTwist. What are the correct settings? Thanks!
2
votes
2answers
477 views

Calibrate EQ Using Speaker SPL Graph

I have a pair of old speakers that I want the EQ calibrated for, and I found their manual with its SPL graph. However, I'm wondering if the graph is even accurate now (the speakers are around 15 years ...
6
votes
2answers
2k views

Why does all timecode start at 1 hour? (01:00:00:00)

Is there a reason timecode in Final Cut 7 and timecode in Pro Tools starts at the 1 hour mark? eg. 01:00:00:00? As opposed to all zeros? Some old broadcast standard that I don't know about?
1
vote
1answer
168 views

How to route from mixer to PC when using outboard equipment

Please let me explain how I've recorded in the past since I think this will make my question clearer. Microphone -> direct into TL Audio pre-amp -> direct into soundcard. This is the only way ...
2
votes
1answer
103 views

GoPro 3 Black gets stuck in “>” Play mode when diving

I have bought a touchscreen backpanel for my GoPro3 black and whenever I take it diving, it switches to ">" play mode (the black triangle shows up on the front panel and keeps stuck there). I cannot ...
2
votes
1answer
246 views

Calibrate Graphic EQ without SPL Meter

I have a graphic EQ connected to my amp which I want to calibrate for a flat response. I've read somewhere that you can't calibrate a EQ by ear using test tones (different frequencies at same volume) ...
-5
votes
2answers
505 views

how to make video scribe or whiteboard animation?

I want to know how to make video scribe or whiteboard animation? Example: Please suggest me some tools
-2
votes
1answer
64 views

How do you make videos like this one?

Other than drawing skills, what software does one need to make videos like this one? http://www.dunnhumby.com/in/about-us-what-we-do
3
votes
1answer
133 views

GH2 HDMI out on MX02 & Black Magic (Need for studio recording)

I have the following gear: 2 x Lumex GH2s Matrox MX02 Black Magic Intensity XLR Shotgun Mic My problem.... I have a studio where the cameras do not move, I use the HDMI out on the cameras in to ...
0
votes
1answer
182 views

How to mask out brush in After effects

I've run into a little snag. I can't seem to mask out some of the brush that I've used on a an empty layer. I create the mask but it simply doesn't mask out anything, it does however mask out pixels ...
2
votes
2answers
68 views

How to assign roto to another layer in After Effects

I'm rather new to AE but I have to do some complicated things for school since we came up with such a hard concept. I have rotoscoped a part of the main footage, now how can I apply this roto mask ...
1
vote
3answers
103 views

Recommendation to Shooting Long Videos

I'm seeking recommendations on how to shoot a long lecture by a guest speaker that is coming to town. I currently own a Canon t4i. My main question is what do I need to avoid my camera from spazzing ...
0
votes
1answer
279 views

Avid import wmv file, just audio no video

I've got a few wmv files, when I import them into avid it seems that the video channel is not being imported. There's just audio. Am I missing something in the import stage? Or in the handling of ...
2
votes
2answers
1k views

How to gradually colourize an object in after effects

I'm rather new to AE but I believe I have the rotoscoping under control. How can I gradually (each frame more) colourize an object in a video. So that at first the whole video is black and white and ...
6
votes
3answers
2k views

Are there any good video editing programs with a command line interface?

I am currently looking for a video editing program which I can control via the command line. The main feature I need is the ability to add some overlay text. Is there anything out there that can do ...
6
votes
1answer
248 views

Is is possible to trim portions of clips in FCPX to save disk space?

I know that it's possible to selectively ingest in the import dialogue, but is it possible to delete "rejected" portions of clips once they've been imported, without deleting the whole clip? If not, ...
0
votes
1answer
96 views

What is the benefit to using multiple RED rocket cards?

Could someone please explain to me when it might be necessary to use multiple RED rocket cards in the same computer? Does an additional card significantly improve workflow speeds for lower resolution ...
2
votes
1answer
954 views

Should I use a GoPro Hero 3 Black for recording drama?

My school's drama department is looking for a camera to record our plays/musicals. I have looked and looked for a good camera that Records in 1080p at 30fps Has a mic-in port so we can connect ...
2
votes
1answer
756 views

How can I move a floating text or image with the video? [duplicate]

In this video you can see a logo next to head that moves with it. How can I do that in Premiere?
3
votes
1answer
206 views

Is there a video player where I can draw on top of video?

I wonder if there is a video player (similar to VLC) where I could stop the video, and draw annotations on top of the video (lika on a transparent layer). Then I could choose to erase it when ...
0
votes
2answers
1k views

Camera for live feed-transfer to external monitor in adjacent room?

I need a camera that functions like a surveillance or webcamera but that I can output to a computer monitor (via adapters) with a VGA-cable. I could perhaps use a normal camcorder for this, but I find ...
2
votes
1answer
610 views

Avoiding motion blur from a network camera

I'm a newbie here. I have a problem that I don't really understand. Hopefully, someone can share their experience. If I have an ip camera of 1) 640x480(sensor width = 3.6mm), 2) focal length from ...
4
votes
1answer
99 views

Final Cut X Events missing

Added a new external drive. Moved Final Cut X Folders to new drive. Now Events and Projects missing. I know files need to be relinked, but I'm not even seeing the Event folders. I relocated the FCP ...
2
votes
1answer
826 views

How to record live video using camcorder?

I need to conduct a video conference using professional video cameras. I will be recording and streaming 1080p video [1]. To that end, I need to stream live video from a professional video camera to ...
1
vote
1answer
171 views

focal length vs shutter speed vs fps [duplicate]

I'm confused about the relationship between focal length and shutter speed, and the relationship between shutter speed and FPS. Can somebody explain in more detail here? What I read is that shutter ...
5
votes
3answers
120 views

Is it possible to encode video using the same codec and container but different parameters for different scenes?

I know that it's very hard to find out best encoding parameters for a whole video file. Wouldn't it be easier to just go through the video and find out the best parameters for different parts (or ...

15 30 50 per page