There are two pieces of functionality which I need from the Behringer XENYX 1202 FX.
Our podcast requires the use of Skype which means:
- Skype-out must go to an input on the mixer
- Skype-in should hear the other microphones but not the channel delerving Skype-out
We should have the ability to playing the Music to the output, while silencing the microphones from the mix.
Solving problem 1 was rather simple all I had to do was make Skype-In
FX Out and turn
FX on the non-skype channels up (Skype channel turn
FX Off). In this case I'm not using
FX In at all.
The second one however is a little tricky. However, in the manual I see the following:
If you are recording a signal via the TAPE OUTPUT and wish to listen to this simultaneously via the CD/TAPE INPUT, do not use the CD/TAPE TO MIX switch. Doing this would create a feedback loop, since the signal would be routed, via the main mix, back to tape via the TAPE OUTPUT. To monitor the CD/TAPE INPUT, use the CD/TAPE TO CTRL switch to assign the tape signal to the monitor(s) or headphones. This will avoid the tape signal being routed to the TAPE OUTPUT.
I'm not sure I understand what they're saying. But, it sounds like it speaks to what I want. Is there any way to accomplish my goal with the one 1202FX Mixer?