Video Production Stack Exchange is a question and answer site for engineers, producers, editors, and enthusiasts spanning the fields of video, and media creation. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I often shoot indoors for interviews with my D90, but I often get a sort of strobing with it. Check out the attached picture, to help you see it on a picture, I added red marking, so simply look on the curtain on the right of that.

strobing effect when filming with D()

My best explanation so far was the type of lighting in the room, which is common in most offices, similar that was is in the picture:

Office lighting

Does anybody know what is going on? Similar experience? Solution? Explanation?

Thanks for any input.

share|improve this question

migrated from photo.stackexchange.com Feb 19 '12 at 20:34

This question came from our site for professional, enthusiast and amateur photographers.

up vote 3 down vote accepted

You seem to be on the right tracks, fluorescent tubes are notorious for flickering and CMOS sensor is read row-by-row in video mode.

Try shooting under window light and/or use your own lighting, e.g. a LED video light. Try shooting so there's not much office visible in background, you won't be able to light it all.

share|improve this answer
    
I m glad you confirmed my theory, won't have to go nuts next time. thanks @Imre – denislexic Sep 9 '11 at 11:03
    
this may also be helpful: en.wikipedia.org/wiki/Rolling_shutter – Chard Feb 19 '12 at 23:30

Many types of artificial lighting flicker at twice the rate of the power source. This is most pronounced with fluorescent lighting, but also happens to a lesser extent with incandescent. Common power sources are 50 Hz (in Europe and most of Asia) and 60 Hz (in North America), which cause 100 and 120 pulses of light each second, respectively.

Other than changing the lighting, one has two options for overcoming this problem:

Frame Rates. Choose a frame rate equal to the lighting pulse rate divided by some integer. This is often the simplest option since most corresponding shutter speeds will appear flicker-free.

Shutter Speeds. Choose a shutter speed equal to the lighting pulse rate divided by some integer. This option often isn’t as straightforward, and can constrain one’s ability to control motion blur. On the other hand, this option typically minimizes flicker under a broader range of lighting and power types.

For example, in North America, the standard 24 and 30 fps settings work with most shutter speeds (since 30×4 and 24×5 = 120). Use the tool below to find other flicker-free shutter speed and frame rate combinations:

http://www.red.com/learn/red-101/flicker-free-video-tutorial

share|improve this answer

And try not to move the camera. I think the manual talks about that. Maybe also try PAL vs NTSC to see if the difference in fps changes the flicker.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.